GUIDES · 12 Aug 2026
How to pack fragile goods for road freight

Most damage claims we settle are not caused by rough handling. They are caused by packing that was never going to survive 1,400 km of Indian highway. Road freight subjects a carton to hours of continuous low-frequency vibration, and vibration finds every weakness a drop test would miss.
Here is what actually works.
1. Buy the box for the trip, not the product
A single-wall carton is fine for a 300 km intra-state move. For a trunk-route consignment, use double-wall corrugated with a burst strength of at least 7 kg/cm². The box specification is printed inside the manufacturer’s joint — if there is no box certificate stamp, assume it is single-wall.
Never reuse a carton more than twice. Corrugation flutes crush permanently, and a third-use box has lost roughly a third of its stacking strength.
2. Fifty millimetres of void fill on every face
The product must not touch any wall of the carton. Aim for 50 mm of cushioning on all six faces, including the bottom. Air pillows are adequate for light goods; for anything above 5 kg use foam or moulded pulp.
This is the rule that gets skipped most often, and it is the one that matters most. A product resting against the carton wall transmits every road shock directly into itself.
3. Immobilise, then isolate
Two different jobs, and they need two different materials.
- Immobilise: stop the item moving inside its box. Foam blocks, corner pads, or a moulded insert.
- Isolate: absorb the energy that reaches the box. Bubble wrap, foam sheet.
Bubble wrap alone does not immobilise — it compresses and the item starts moving inside the void it created. This is why items arrive damaged in boxes that look generously padded.
4. Tape the H, not the seam
Use pressure-sensitive tape at least 48 mm wide. Apply three strips to each of the top and bottom: one along the centre seam, one along each edge seam. This is the H-pattern. Two strips is not enough on a double-wall carton, and masking or cloth tape fails at the humidity levels inside a closed trailer in transit.
5. Label once, and remove the old ones
Multiple visible labels are the single most common cause of a misroute. Strip every previous label and barcode from a reused carton. Put the new label on the largest flat face, never over a seam or an edge — a label wrapped around a corner will not scan, and an unscannable consignment gets handled manually at every hub.
Write the destination pin code on the carton in marker as a fallback.
What we will not carry
Regardless of packing quality, some categories cannot move on a standard docket: currency and bullion, flammable liquids, firearms and ammunition, and narcotics. Perishables and pharmaceuticals move only with prior approval and the relevant licence on file.
The full list is on our packaging guidelines page.
If something does arrive damaged
Photograph the carton before opening it, including all six faces and the labels. Claims filed with pre-opening photographs are settled substantially faster, because they let us establish whether the damage happened in transit or before pickup.
File from the support page with your docket number. Insured claims are settled within 14 working days.
Ready to streamline your logistics?
Book a shipment, track your cargo, and experience the RAPIDLINK difference.
